SCADA           
LINK

Home

Products

Services

Applications

Technotes

Support

Contact Us

Barnett B1290 & CV2  

Alarm Dialer

   B1290 Landline Alarm Dialer             CV2 Cellular Alarm Dialer

B1290 Landline Alarm Dialer 

The B1290 Barnett Plus is a rugged, industrialized Alarm Dialer that connects to a regular RJ-11 phone line. To setup the B1290 to monitor a remote site:

• connect digital alarm inputs
• record voice alarm messages
• set phone numbers

When an alarm occurs, the ProTalk Plus automatically dials the callout numbers in its directories, and annunciates the alarm in a clear, toll-quality recorded voice. The user can then acknowledge the alarm via touch tone keys. If an acknowledge code is not received, the ProTalk Plus keeps dialing through its stored list of telephone or pager numbers until the alarm is acknowledged. All input and output status can then be interrogated so that the appropriate action can be taken. Relays can also be operated remotely by entering codes from your telephone.

• 8 optically isolated digital inputs
• 4 DTMF controlled form C relay outputs
• RJ11: tone or pulse phone interface for dialing, voice recording  &  programming
• Optional RS-232 programming interface
• 4 callout directories
• 16 phone numbers per directory
• 4 different shifts can be programmed, allowing for alternating personnel to be notified based on the time of day
• Relays can be activated automatically when inputs are energized, or activated manually for optimum control.
• Unique site identification
• Full-length, user-recordable messages for each input and output.
• Alarms can be announced over: radio, telephone, pager, or public address system.
• Remote interrogation of status of inputs and outputs
• Optional expansion from basic 8 digital alarm inputs and 4 relay outputs up to 64 digital inputs and 32 outputs.
• Industrial Temp: -40° C to +60° C
• Coded tones along with voice message can activate relays or annunciator panels.
• Master capability to concentrate alarms from other remote B1290s
• Wide Input Power: 11.5-28VDC
• Easy to read status indicators and removable terminal blocks

CV2 Cellular Alarm Dialer

The CV2  is a rugged, industrialized Alarm Dialer that connects to an Analog cellular network (see coverage map). It is setup in the same way as the 1290 above except that it also has the ability to accept analog inputs. To setup the CV2:

• connect digital or analog alarm inputs
• record voice alarm messages
• set phone numbers

When an alarm occurs, the ProTalk Plus automatically dials the callout numbers in its directories, and annunciates the alarm in a clear, toll-quality recorded voice. The user can then acknowledge the alarm via touch tone keys. If an acknowledge code is not received, the ProTalk CV2 keeps dialing through its stored list of telephone or pager numbers until the alarm is acknowledged. All input and output status can then be interrogated so that the appropriate action can be taken. Relays can also be operated remotely by entering codes from your telephone.

Features:

• 8 programmable alarm inputs can be any combination of digital, analog, totalizer, watchdog, or interval types.
• 12 -24VDC for digital inputs
• 0 - 5VDC for analog inputs
• 4 different shifts can be programmed, allowing for alternating personnel to be notified based on the time of day
• 60 sec. max message length; total of 6 minutes of recording
• Low power consumption
• RJ-11 interface to phoneset to record high quality digitized voice
• RS-232, 9600 bps for PC programming
• Up to 6 directories / alarm groupings
• 16 phone numbers per directory
• 8 DTMF controlled outputs: 500mA open collector
• Wide Input Power: 12-30VDC, 200mA; 1.25A on Transmit
• Operating Temp: -20-50 Deg. C
• Max. RF Output Power: 3 Watts
• Sensitivity: -112dBm for 12 dB SINAD
• Antenna Impedence: 50 Ohms
• Easy to read status indicators and removable terminal blocks
• Emergency telephone use through the built in cell-phone
• Security codes for tamper-proof operation
• Installation and maintenance diagnostics

Applications:

• Pump activity
• Purification equipment
• Leak detection devices
• Remote compressor sites
• Power generators

504 - 42nd Ave.S.E.
Calgary, Alberta, Canada T2G   1Y6
(403)  243-5135  Fax: (403) 243-5165
www.scadalink.com