▼ PRODUCTS
▼ Protalk Plus & CV2
The CV2 is a rugged, industrialized Alarm Dialer that connects to any North
American cellular network (see coverage map).
It is setup in the same way as the Protalk Plus below except that it also has
the ability to accept analog inputs. To setup the CV2:
● Connect digital alarm inputs
● Record voice alarm messages
● Set phone numbers
When an alarm occurs, the Protalk CV2 automatically dials the Callout numbers in its directories, and annunciates the alarm in a clear, toll-quality recorded voice. The user can then acknowledge the alarm via touch tone keys. If an acknowledge code is not received, the Protalk CV2 keeps dialing through its stored list of telephone or pager numbers until the alarm is acknowledged. All input and output status can then be interrogated so that the appropriate action can be taken. Relays can also be operated remotely by entering codes from your telephone.
Contact us now for more information.
- ● 8 programmable alarm inputs can be any combination of digital, analog, totalizer, watchdog, or interval types.
- ● 12 to 24VDC for digital inputs.
- ● 0 to 5VDC for analog inputs.
- ● 4 different shifts can be programmed, allowing for alternating personnel to be notified based on the time of day.
- ● 60 sec. max message length; total of 6 minutes of recording.
- ● Low power consumption.
- ● RJ-11 interface to phone set to record high quality digitized voice.
- ● RS-232, 9600 Baud Serial connection for PC programming.
- ● Up to 6 directories / alarm groupings.
- ● 16 phone numbers per directory.
- ● 8 DTMF controlled outputs: 500mA open collector.
- ● Wide Input Power: 12 to 30VDC, 200mA; 1.25A on Transmit.
- ● Operating Temp: -20°c to +50°C.
- ● Max. RF Output Power: 3 Watts.
- ● Sensitivity: -112 dBm for 12 dB SINAD.
- ● Antenna Impedance: 50Ω.
- ● Easy to read status indicators and removable terminal blocks.
- ● Emergency telephone use through the built in cell-phone.
- ● Security codes for tamper-proof operation.
- ● Installation and maintenance diagnostics.
The Protalk Plus is a rugged, industrialized Alarm Dialer that connects
to a regular RJ-11 phone line. To setup the Protalk Plus to monitor a remote
site:
● Connect digital alarm inputs
● Record voice alarm messages
● Set phone numbers
When an alarm occurs, the ProTalk Plus automatically dials the callout numbers in its directories, and annunciates the alarm in a clear, toll-quality recorded voice. The user can then acknowledge the alarm via touch tone keys. If an acknowledge code is not received, the Protalk Plus keeps dialing through its stored list of telephone or pager numbers until the alarm is acknowledged. All input and output status can then be interrogated so that the appropriate action can be taken. Relays can also be operated remotely by entering codes from your telephone.
Contact us now for more information.
- ● 8 optically isolated digital inputs.
- ● 4 DTMF controlled form C relay outputs.
- ● RJ11: tone or pulse phone interface for dialing, voice recording & programming.
- ● Optional RS-232 programming interface.
- ● 4 callout directories.
- ● 16 phone numbers per directory.
- ● 4 different shifts can be programmed, allowing for alternating personnel to be notified based on the time of day.
- ● Relays can be activated automatically when inputs are energized, or activated manually for optimum control.
- ● Unique site identification.
- ● Full-length, user-recordable messages for each input and output.
- ● Alarms can be announced over: radio, telephone, pager, or public address system.
- ● Remote interrogation of status of inputs and outputs.
- ● Optional expansion from basic 8 digital alarm inputs and 4 relay outputs up to 64 digital inputs and 32 outputs.
- ● Industrial Temp: -40°C to +60°C.
- ● Coded tones along with voice message can activate relays or annunciator panels.
- ● Master capability to concentrate alarms from other remote B1290s.
- ● Wide Input Power: 11.5 to 28VDC.
- ● Easy to read status indicators and removable terminal blocks.