Menu

This is box title

Gateway Stick

Gateway Stick combats a common problem with RF networks, which are increasingly used to monitor and control remote devices over tens or hundreds of square miles. Gateways traditionally have different location requirements for their electronics module and antenna, making it necessary to place them separately. Gateway-in-a-Stick is a revolutionary solution that combines them in one easy-to-install component.

Gateway Stick & Breakout Board

Features

  • Optional Ethernet Modbus TCP interface
  • Optional Analog Output Module
  • Unique design integrates high-gain, omni-directional antenna and gateway electronics in one place
  • Tough materials withstand rugged outdoor environments
  • RS485 Modbus RTU interface
  • RS232 configuration and debug port
  • Optional remote shutdown programmable control logic, no additional PLC required
  • Stores the most recent readings of all nodes in the network in Modbus format
  • Times out readings from off-line sensors
  • Manages outbound communications
  • Reduces power consumption
  • Mounts with clamps, brackets, or standard electrical/plumbing fittings
  • 500mW radio with high gain antenna
  • Automatically configures as a star or mesh network
  • Class 1 Division 2 (C1D2), Temp Code T5, Groups C&D. Conforms to ISA 12.12.01 and UL 916, Certified to CSA C22.2 No. 142 and CSA C22.2 No. 213

 


Modbus DIN Mount Gateway

The DIN mount Gateway is an integrated device combining a high power radio with the gateway electronics in a single DIN mounted package.

DIN Mount Gateway

Features

  • RS485 Modbus RTU interface
  • Two configurable digital outputs for local alarming and control
  • RS232 configuration and debug port
  • RP-SMA Antenna port for connection to 900MHz antennas
  • Two digital putputs for locan signaling or alarming, internal logic to map any remote data to the outputs
  • Optional Ethernet Modbus TCP interface module
  • Optional Analog Output Module
  • Optional remote shutdown programmable control logic, no additional PLC required
  • Stores the most recent readings of all nodes in the network in Modbus format, register remapping supported
  • Supports remote node configuration
  • Remote HART sensor configuration using PACTware or Radar Master
  • Times out readings from off-line sensors
  • Manages outbound communications
  • Internal Event logging
  • DIN Mount into existing panel boxes
  • 6-36VDC wide range power input
  • 500mW radio
  • Automatically configures as a star or mesh network
  • Class 1 Division 2 Certified, Groups C&D, Temperature Code T5. Certified to CSA C22.2 No. 213, Conforms to ISA 12.12.01