Overview
Industrial Liquid Management Solutions including Pumping, Containment, and Treatment World Wide.
Remote Monitoring Solution to augment their Sales, Rental and Service offerings.
Tank Monitoring
Tank Monitoring
BakerCorp rents containment tanks to customers for liquid storage. This includes oil, lubricant, and water. Supply tanks need to be monitored and replenished prior to low level situation which can be a source of operational outages and maintenance problems. High level conditions need to be monitored to prevent spillage conditions. Since many of these tanks are for remote operations there is a need for remote tank monitoring system, BakerCorp can provide as rental to the customers.
Bentek Systems proposes the use of Satellite Based Remote Monitoring Solution, SCADALink SAT100 or SAT120 Hubs with Wireless Level Transmitter to provide monitoring solution.
Applications
- Transformer Oil Monitoring (1 to 2 tanks at site)
- Pipeline Lubricant Supply Tank
- Frac Water Supply Tank (up to 40 tanks at a location)
Proposed System
The proposed monitoring system would be comprised of SCADALink SAT1xxx Hub (Dual Mode & Cellular Modem RTU) and Wireless Sensor Nodes.
The use of wireless sensor Nodes allows installation at appropriate sensing location; and number of nodes as required. At each remote site, there would be a single Wireless Hub that can connect to nodes up to 1 mile line of site.
Wireless Sensor Gateway and Hub
Use of SAT1xxx dual satellite/cellular operation ensure coverage in the most remote locations.
The system as proposed utilizes the a Solar powered SAT100 (Satellite only) or SAT120 (Sat/Cellular) hub with Wireless Sensor Gateway.
Wireless Tank Level Sensor Nodes
Tank Level sensors are connected via a Wireless Sensor Node as shown. Guided Wave Radar Sensors have been proposed as the most flexible sensor offering. Wireless Sensors enable easy placement of sensor and panel locations. Wireless Sensor Nodes can be battery or battery/solar powered as shown.
SAT130 HUB & Wireless Sensor Node with Guided Wave Radar Level Transmitter on a Single Storage Tank
Wireless Sensor Node with Guided Wave Radar Level Transmitter on Storage Tanks
Water Treatment Flow Monitoring
Water Treatment Flow Monitoring
BakerCorp has a requirement to provide portable flow meter solutions for their Water Treatment Rental and Service Solutions Clients.
Bentek Systems proposes to provide BakerCorp the following solutions.
- Portable Battery Flow Meters Skids
- Remote Monitoring Access using the SAT130 Wireless Gateway and Wireless Flow Sensor Nodes
A Portable Flow Meter Skids
Portable Rental Flow Meters Skids are proposed for in Water Treatment Rental and Service Solutions as shown. Each Flow Meter is a Battery Powered Electromagnetic Flow Meter as shown. Each skid is shelf contained including flow meter, meter skid, and piping including camlock fittings.
Portable Flow Meter Skid Details
The preceding drawing shows example of a portable meter skid for 6″ Flowmeter.
The meter skid includes the Seametrix IMAG Mag Flowmeter, complete with meter skid cage, transition piping and camlock type quick connectors. The Flow Meter Skid is battery powered with local display and is complete ready to operate.
B Wireless Sensor Nodes with SAT130 Wireless Sensor Gateway & Hub
A Wireless Sensor Gateway Hub is used with one or more Wireless Flow Transmitter Nodes. Each Wireless Flow Transmitter Nodes are connected to the flowmeters.
The Wireless Sensor Gateway Hub allows the monitoring of the Gateway Hub locally (WiFi) and remotely (satellite and cellular) via web browser on laptop, tablet or smartphone. Addition Wirelesss Sensor modes can be deployed data to collect level, temperate, pressure, and flow by deploying the appropriate wireless sensor nodes.
The proposed system utilizes a SAT130 (Sat/Cellular) hub with Wireless Sensor Gateway. The use of the dual mode Satellite/Cellular SAT130 ensure coverages in the most remote locations. Wireless Sensor Nodes enable flexibility allow addition of Wireless Sensor Nodes as required without hardwiring or cables.
Wireless Sensor Nodes
Flow Meters are connected via Wireless Turbine Sensor Nodes as shown.
Portable Flowmeter Skid Details with SAT130 Hub & Wireless Sensor Nodes Attached
The preceding drawings shows example of a portable meter skid for a 6″ Flowmeter with SAT130 Wirelesss Hub and Wireless Sensor Nodes; or with Wireless Sensor Node attached. A single Wireless Hub can support numerous Wireless Sensor Nodes up to 1 mile line of site.
Gallery
A. Tank Monitoring Equipment
| A1. SAT130 Wireless Satellite / Cell / Wifi / Ethernet Hub with Wireless Gateway A2. Terminal with Display | A3. Solar Powered Radar Level Transmitter and Flow Meter
|
 |  |
B. Water Treatment Flow Monitoring Equipment
| B1. SAT130 Wireless Satellite / Cell / Wifi / Ethernet Hub with Wireless Gateway B2. Terminal with Display | B3/B4/B5. Seametrics Flowmeter Skid complete Battery PoweredFlowmeter, Skid, and Camlock Connectors
|
| |
| B6. Wireless Sensor Node with Junction Box | Seametrics Flowmeter |
 |  |
C. Optional Equipment
| SAT120 Dual Mode Satellite/Cell Hub with Wireless Gateway & Local Display | SAT120 Dual Mode Satellite/Cell Hub with Wireless Gateway |
 |  |
Web Based Interfaces
SatSCADA Web Based Interface
The SatSCADA Web Client application provides cost effective, easy to use monitoring to clients for standard monitoring industrial applications.
The SatSCADA Web Client provides user access via a Web Browser on Desktops, Laptops or Smartphones.
The Web Client provides Site View, Tag View, Trend and Map Views, and is auto-configured based on the SAT1xx Terminal Configurations.
Local RTU Web Interface Example
The RTU has a Web Interface Accessible Locally or Remotely. Local Interface is via WiFi or USB; Remote Interface is via Internet Connnectivity.