-
SCADALink SAT130/SAT140 Wireless Industrial IoT Gateway
The SCADALink SAT130 is a M2M Communications platform with Wireless Connectivity via Cellular, Satellite, & Wi-Fi; Wired Connectivity via Ethernet, RS232, & RS485; I/O via digital and analog (4-20ma) I/O ports. -
AirLink Raven XT Cellular Modem
Tough, intelligent serial wireless gateway for CDMA 1X, EVDO & EVDO Rev A networks. -
BlueTree 6×01 Cellular Modems
Class I Div 2 certified rugged intelligent wireless router/modems for CDMA and HSPA networks. Has built-in serial, ethernet and USB interfaces. -
BlueTree 6×21 EV-DO A Cellular Modems
Class I Div 2 certified rugged intelligent wireless router/modems for CDMA and HSPA networks. Has built-in serial, USB and 5 Ethernet ports. -
MicroHard IPN3G Cellular Modem
The IPn3G provides a secure industrial strength wireless solution using the 3G network infrastructure for critical data communications. -
MicroHard IPN4G LTE Cellular Modem
The IPn4G provides a secure industrial strength wireless solution using the new and ultra-fast 4G LTE network infrastructure. -
MicroHard VIP4G Cellular Modem
VIP4Gb provides a rugged, industrial strength wireless solution using 4G LTE network infrastructure for critical data communications. -
SCADALink Airtime Provisioning
Complete Airtime Provisioning for Cellular and Satellite M2M Data Plans providing Cost Effective and Secure M2M Connectivity Worldwide.
Overview
Cellular Modem Hardware for SCADA & M2M
Cellular Modems for Wireless SCADA applications. Modems are rated for Wide Temperature Range, Low Power Draw, and Class I Div 2 . Provide Serial and Ethernet Connectivity to PLC, RTU, EFM, Data Loggers, and IP Cameras at Remote Sites.
Ordering
1. SAT130 RTU Systems | ||||
---|---|---|---|---|
Item | Part No. | Description | Note | |
1A | ![]() | SAT130 KIT | SAT130 Dual Mode Satellite/Cellular Kit with TB2, Terminal Block TB2 (for mounted in user supplied panel). SAT130 KIT | |
1B | ![]() | SAT130 RTU-DC (DC Powered RTU System) | SAT130 Dual Mode Satellite/Cellular RTU - 18" x 16" x 8" NEMA4X Enclosure TB1 Termination Board, 10-30VDC Input, 24VDC Power. SAT130 RTU-DC | |
1C | ![]() | SAT130 RTU-AC-BK (AC Powered RTU System) | SAT130 Dual Mode Satellite/Cellular RTU - 18" x 16" x 8" NEMA4 Enclosure with SAT130, TB1 Termination Board, 120 VDC AC with 24VDC Battery Backup. SAT130 RTU-AC-BK | |
1D | ![]() | SAT130 RTU-SOL-5024 | SAT130 Satellite RTU Kit with 20" x 20" x 10" NEMA4 Enclosure. 2x 12VDC 30W Solar Panel, 100AH Battery, 24VDC Power. SAT130 RTU-SOL-5024 | |
1E | ![]() | |||
1F | ![]() |
Notes:
- Standard Cable Length – Order Longer Lengths as Required
Related Products
Antennas and Accessories
-
Antennas
UHF, Spread Spectrum & Cellular Antennas. -
Antenna Masts and Mounting Brackets
Antenna masts and building mounting brackets can be invaluable in raising antennas above obstructions to increase RF signal. Masts can be mounted on unistrut or attached to sides of buildings using BM1 building mounts. -
Cellular Amplifiers / Cellular Signal Booster for SCADA/M2M
Increase the usable signal range of cellular modems. Perfect for use in areas with poor signal. -
Telescopic Antenna Masts
Telescopic antenna masts can enable easy, rapid and safe deployment for both fixed and mobile applications. SCADALink TELE40 Masts can provide antenna height for Licensed, Unlicensed (900 Mhz), WiFi, Cellular, and Satellite communications applications. -
Cellular Amplifier for SCADA & M2M
The ClearRF Cellular Signal Booster is designed for Machine-to-Machine(M2M) applications. The Passive Bypass technology allows the amplifier to passively bypass itself and become merely a pass through cable. -
Antenna Cabling and Accessories
Providing a technical description of antenna cabling and accessories.
Technical Service