-
Antennas
UHF, Spread Spectrum & Cellular Antennas. -
Antenna Masts and Mounting Brackets
Antenna masts and building mounting brackets can be invaluable in raising antennas above obstructions to increase RF signal. Masts can be mounted on unistrut or attached to sides of buildings using BM1 building mounts. -
Cellular Amplifiers / Cellular Signal Booster for SCADA/M2M
Increase the usable signal range of cellular modems. Perfect for use in areas with poor signal. -
Telescopic Antenna Masts
Telescopic antenna masts can enable easy, rapid and safe deployment for both fixed and mobile applications. SCADALink TELE40 Masts can provide antenna height for Licensed, Unlicensed (900 Mhz), WiFi, Cellular, and Satellite communications applications. -
Cellular Amplifier for SCADA & M2M
The ClearRF Cellular Signal Booster is designed for Machine-to-Machine(M2M) applications. The Passive Bypass technology allows the amplifier to passively bypass itself and become merely a pass through cable. -
Antenna Cabling and Accessories
Providing a technical description of antenna cabling and accessories.
Overview
Cellular Amplifier for SCADA & M2M
The ClearRF Cellular Signal Booster is designed for Machine-to-Machine(M2M) applications. The Passive Bypass technology allows the amplifier to passively bypass itself and become merely a pass through cable. Allowing the connected device to stay on-line to communicate. The compact size and 8-36VDC range allows it to be powered directly.
8-36VDC Range
This allows the amplifier to be used in 12VDC and 24VDC power systems typically used in SCADA applications without inverters.
Small Size
Allows easy installation in SCADA and M2M applications requiring an amplifer.
Cellular Signal Booster connects In-Line with any Cellular Router, Modem or Module
- Digi
- Sierra Wireless
- Microhard Systems
- Cradlepoint
- Sixnet
- Telnet
- CalAmp
- MultiTech
ClearRF WRE2710-S M2M Specifications
- Network Compatible: 2G, 3G, 4G, LTE, GSM, GPRS, CDMA
- Gain: 15dB: Cellular 850; 15dB: PCS 1900
- Frequency Range: 824/894 MHz – 1850/1900 MHz
- Rated Uplink Max Output Power: Cellular 850; 27dBm, PCS 1900; 27dBm
- Rated Downlink Max Output Power: Cellular 850; ‐45dBm, PCS 1900; ‐45dBm
- Rated Mean Output Power: 27dBm
- Current Draw @ 12VDC12VDC: Idle: 250 milliamperes; Max: 1 ampere
- Power Requirement: 8.0 to 36.0 VDC (Negative Ground)
- Connector: SMA Female
- Input/output Impedance : 50 Ohms
- Dimensions: 4.9“ L x 2.7″ W x 0.92“ H