Overview
4G LTE Cellular Ethernet/Serial Gateway with WIFI
VIP4Gb provides a rugged, industrial strength wireless solution using 4G LTE network infrastructure for critical data communications. The VIP4Gb provides simultaneous network connections for 802.11a/b/g/n WiFi devices, 4 x 10/100/1000 Ethernet ports, Digital I/O, and a RS232/RS485 port, resulting in a communication device that can be deployed in any application!
The VIP4Gb is a powerful 4G LTE device compatible on any cellular network. It provides robust and secure wireless communication of Serial, Ethernet & WiFi data.
Features & Specs
Features
- Incredibly Fast 4G LTE Operation
- Up to 100Mbps downlink / 50 Mbps uplink
- Multi-Band Support for Global Use
- 802.11a/b/g/n WiFi
- 4x Digital I/O
- Main TX/RX, Diversity and GPS antennas
- 4x 10/100/1000 Gigabit Ethernet Ports
- RS232/485/422 Serial Port
- Wide Operating Temperature (-40C to +85C)
- Firewall with ACL Security
- IPsec, GRE/VPN Tunneling
- Multiple Tunnel Support
- Integrated GPS
- SMS Alerts, Control
- Full 802.1Q VLAN Support
- User interface via local console, telnet, web browser
- Local and remote wireless firmware upgradable
- Microhard NMS Integration
Specifications
4G LTE
- Supported Bands
- LTE FDD (Bands 1-5,7,8,13,17,18,19,20)
- UMTS | DC-HSPA+ (Bands 1,2,4,5,8)
- GSM | GPRS | EDGE (Bands 2,3,5,8)
- 3GPP Protocol Stack Release 9
- Data Features
- LTE: DL 100 Mbps, UL 50 Mbps
- HSPA+: DL 21 Mbps, UL 5.7 Mbps
- WCDMA: DL/UL 384 kbps
- EDGE Class 33: DL/UL 236.8 kbps
- GPRS Class 33: DL/UL 85.6kbps
- Carrier Connection
- Dial on Demand, PAP, CHAP, Idle Time, ICMP
- Keep Alive, DDNS, IP pass-through, Wireless
- Traffic Timeout
- SMS Features
- SMS to/from Serial RS232/485
- SMS to/from Ethernet via Telnet
- SMS Alerts
WiFi
- Frequency
- 2.4 GHz / 5.8 GHz
- Spread Method
- OFDM/QPSK/16QAM/64QAM
- Data Rates
- 802.11a/b/g/n
- Output Power (Order Option)
- 802.11a/b/g/n (Adjustable up to 20dBm) or:
- 802.11b/g (Adjustable up to 30dBm)
General
- GPS: GPS TCP Server, UDP/Email Reporting, GpsGate, TAIP Service
- Navigation Update Rate:
- Up to 5 Hz
- Accuracy
- Position: 2.5 m CEP
- SBAS: 2.0 m CEP
- Acquisition
- Cold Starts: 27 seconds
- Aided Started: 4 seconds
- Hot Starts: 1 seconds
- Sensitivity
- Tracking : -159 dBm
- Cold Starts: -147 dBm
- Hot Starts: -156 dBm
- Navigation Update Rate:
- USB (Optional)
- USB Console Port
- USB to Serial Data Routing
- USB to Ethernet Data Routing (NDIS)
- Serial Port Server
- -Extensive Serial Port Support.
- TCP server & client / UDP server & client / Modus /
- PPP / SMS / SMTP / AT command
- -Extensive RS232/485/422 support
- Serial Baud Rate
- 300bps to 921kbps
- Serial Interface
- RS232/422/485 (2/4 wire)
- Ethernet
- 4 x 10/100/1000 BaseT, Auto – MDI/X IEEE 802.3
- Network Protocols
- TCP, UDP, TCP/IP, ARP, ICMP, DHCP, HTTP, SNMP, FTP, DNS, Serial over IP
- Security
- VPN, IPSec with IKE/ISAKMP; Multiple tunnel
- support (16); 3DES and up to 256-bit AES Encryption,
- Site to Site Tunneling
- L2TP, GRE, HTTPS
- Firewall
- NAT, NAT-T VPN tunneling, Port forwarding, VPN/GRE pass-through; Access control lists (IP filtering), Data origin / integrity Authentication, DMZ
- Diagnostics
- RSSI, Ec/No, Voltage, Temp, Remote diagnostics, Watchdog, UDP Reporting
- Management
- Local Serial Console, Telnet, WebUI, SNMP, Wireless Upgrade, RADIUS, AT Command Interface
- Input Voltage
- 7 – 30VDC (4 PIN Interlocking) or Passive PoE over WAN Port
- Digital I/O
- 4 Inputs (0 – 30Vdc)
- 4 Outputs (Open Drain – 150mA Sink)
- Connectors
- Antenna
- Cellular: SMA Female x2 (Main, DIV)
- GPS: SMA Female
- WiFi: RP-SMA Female x2
- Data: RJ-45 (Ethernet), Female DB9
- SIM: 1.8 / 3.0V (Optional Dual SIM Available)
- Environmental
- Operating Temperature: -40oC to +85oC (-40oF to +185oF)
- Humidity: 5-95%, noncondensing
- Weight: Approx. 405 grams
- Dimensions: Approx. 5.60” x 3.70” x 1.17” (142mm x 94mm x 30mm)
- Approvals PTCRB
- FCC / IC
- Carrier Specific Approvals:
- Bell, Rogers, Telus
Documentation
Related Products
Cellular Antennas
Cellular Antennas Cabling and Accessories
-
Cellular Amplifiers / Cellular Signal Booster for SCADA/M2M
Increase the usable signal range of cellular modems. Perfect for use in areas with poor signal. -
Antenna Masts and Mounting Brackets
Antenna masts and building mounting brackets can be invaluable in raising antennas above obstructions to increase RF signal. Masts can be mounted on unistrut or attached to sides of buildings using BM1 building mounts.