MDS 4710: Class I Div 2 Certified Licensed Frequency Radio
The MDS 4710 is a price/performance leader for licensed radios. It provides an increase throughput and longer range for multiple address systems. Transparent and direct asynchronous communication offers real-time communication. No extra software or programming is needed to implement communications using standard asynchronous protocols. A general purpose (unconditioned) digital output is available. Contact us for more information on this product.
Legacy Product –
This item is no longer available/recommended for new network installations. Limited numbers of MDS 4710 available for immediate emergency replacements. For new installation please see the MDS SD4.
MDS 4710 Replacement with MDS SD4
The GE MDS SD4 has a 4710 compatibility mode to allow it to replace 4710A and 4710B radios in existing 4710X based networks.Note that the RF connector and power connectors on the SD4 are different than that of the 4710 series. A 4710 compatibility kit is necessary to use the SD4 for a direct 4710 replacement.The 4710 compatibility mode of the SD4 helps allow migration and transition from 4710 networks to SD4 networks. For multiple new site installs, transition to GE MDS SD4 are recommended to allow future connectivity to Ethernet based devices and networks.New and refurbished MDS 4710 are available in limited quantities for customers has large existing 4710 networks, and want to have 4710 plug-in replacement for failed 4710 nodes.
Features & Specs
- Dimensions: 5.08cm x 14.29cm x 18.4cm
- Data Interface: RS-232, DB-25 Female
- Input Voltage 10.5 – 16V DC, 13.8VDC Nominal
- Operating Temperature Range: -30°C to +60°C
- CSA Approved
- Certified for use in Class 1, Division 2 Group A, B, C & D, T6 Locations
MDS 4710 Data Sheet
AntennasUHF, Spread Spectrum & Cellular Antennas.
Antenna Masts and Mounting BracketsAntenna masts and building mounting brackets can be invaluable in raising antennas above obstructions to increase RF signal. Masts can be mounted on unistrut or attached to sides of buildings using BM1 building mounts.