-
Antennas
UHF, Spread Spectrum & Cellular Antennas. -
Antenna Masts and Mounting Brackets
Antenna masts and building mounting brackets can be invaluable in raising antennas above obstructions to increase RF signal. Masts can be mounted on unistrut or attached to sides of buildings using BM1 building mounts. -
Cellular Amplifiers / Cellular Signal Booster for SCADA/M2M
Increase the usable signal range of cellular modems. Perfect for use in areas with poor signal. -
Telescopic Antenna Masts
Telescopic antenna masts can enable easy, rapid and safe deployment for both fixed and mobile applications. SCADALink TELE40 Masts can provide antenna height for Licensed, Unlicensed (900 Mhz), WiFi, Cellular, and Satellite communications applications. -
Cellular Amplifier for SCADA & M2M
The ClearRF Cellular Signal Booster is designed for Machine-to-Machine(M2M) applications. The Passive Bypass technology allows the amplifier to passively bypass itself and become merely a pass through cable. -
Antenna Cabling and Accessories
Providing a technical description of antenna cabling and accessories.
Overview
MDS Transnet 900: Class I Div 2 Certified Unlicensed Frequency Radio
The MDS TransNET utilizes FHSS (Frequency Hopping Spread Spectrum) in the ISM Band of 902 – 928 MHz to provide reliable long range data transportation at up to 115.2 kbps. The TransNET provides transparent data communications for nearly all SCADA/Telemetry and EFM protocols including MODBUS.
Any MDS TransNET may be configured as a repeater extension. This allows store and forwards data operation to extend the operating range of the network. Multiple repeaters may exist at any level of the network preventing a single radio failure from disabling the entire network. There is no limit to the number of repeaters which may be used. This product is available for use in Class I, Division 2, Groups A, B, C & D hazardous locations.
MDS 9310 and MDS 9310 Upgrades
For legacy serial MAS networks, the Transnet 900 can be used for an upgrade to legacy MDS 9310 or MDS 9810 based networks.
Contact us for more information on this product.
Features & Specs
- Dimensions: 8.9cm x 12.7cm x 2.5cm
- Antenna Connector: TNC Female
- Data Interfaces: RS-232,RS-485 DB9
- Input Voltage 6 – 30 VDC
- Operating Temperature Range: -40°C to +70°C
- CSA Approved
- Certified for use in Class 1, Division 2 Group A, B, C & D, T6 Locations
Documentation
Related Products
Antennas and Accessories
Improve communications by using tower and mast mountable antennas.
Lightweight masts elevate antennas to boost signal strength. Mounting brackets can be designed to mount masts on vehicles, buildings and RTU Stands.
Services
RF Path Study and Onsite Path Testing to help establish reliable communications for your SCADA or Telemetry application.
Systems and Communication designs customized to your operations.