This is box title
Remote Shutdown Switch
The Remote Switch option allows for a standard RSD System to be configured for use as a stand alone system without a Gateway. Using a simple table based configuration the system can be setup to switch the relay outputs when one (or more) remote nodes reaches a limit. A typical application is to shut off a well when one or more remote tanks become full.
Features
- Stand alone system. No PLC or Gateway required
- Simple configuration interface
- Accepts data from all SignalFire remote nodes
- Two relay outputs
- Fail Safe capability
- Range up to 4 miles
- Small form factor DIN mount relay enclosure
- Status LED’s
Specification
- Operating Temp: -40C to 70C
- Power: 6-36 VDC, (battery power optional)
- Relay Outputs: 2A, 30V, SPDT
- Digital Inputs: Dry contact or 30 volts max (push-pull)
- Radio Power: 500 mW
- Antenna Type: Omnidirectional
- Antenna Gain: 5dB
- Receive Sensitivity: -105 dBm
- Frequency: 902-928 MHz license-free ISM band, FHSS, FCC part 15 compliant
- Range: 3+ miles (line of sight)
- Internal Diagnostics: Supply voltage, signal strength, error conditions
- Safety Rating: Non-incendive, Class 1 Division 2 groups C & D
